Digital Diagnostic Functions
SOPTIC’s SFP+10GB-DB40-D is hot pluggable 3.3V Small Form-Factor transceiver module .It designed expressly for high-speed communication applications that require rates up to 10.7Gb/s ,it designed to be compliant with SFF-8472 SFP+MSA . The module data link up to 20km in 9/125um single mode fiber .The optical output can be disabled by a LVTTL logic high-level input of Tx Disable .Tx Fault is provided to indicate that degradation of the laser . Loss of signal(LOS) Output is provided to indicate the loss of an input optical signal of receiver or the link status with partner .
Up to 10.7Gbps Data Links
Single Mode LC Receptacle Bi-directional transceiver
Up to 40km transmission on SMF
1330nm DFB laser and 1270nm PIN receiver
2-wire interface with integrated Digital Diagnostic monitoring
EEPROM with Serial ID Functionality
Compliant with FC_PI_4REV 7.0
Compliant with SFP+MSA with duplex LC connector
Single +3.3V Power Supply and LVTTL Logic
Operating Case temperature : -40～+70
10GBSE-BX at 10.3125Gb/s
10GBASE-BX at 9.953
8XFC at 8.5Gbps
4XFC at 4.25Gpbs
2XFC at 2.125Gpbs
1XFC at 1.0625Gpbs
1. Absolute Maximum Ratings
Storage Ambient Humidity
Operating Relative Humidity
Power Supply Voltage
Signal Input Voltage
2.Recommended Operating Conditions
Ambient operating temperature
Without air flow
Power supply voltage
Power supply current
Single Mode fiber
1. Specification of Transmitter
Average launched power
Average launched power(laser off)
Optical modulation amplitude
Center wavelength range
Side mode suppression ratio
Output eye mask
Compliant with FC_PI-4REV 7.0
2. Note(1) : The optical power is launched into SMF
Note(2) : Measured with RPBS2^31_1 Test pattern @ 10.3125Gbs
4. Specification Of Receiver
Input Optical Wavelength
Receiver Sensitivity In Average
Input Saturation Power (Overload)
SFP Optical module, another name is SFP transceiver. The function of the optical module is photoelectric conversion. The sending end converts the electrical signal into the optical signal. After the transmission through the optical fiber, the receiving end converts the optical signal into the electrical signal. SFP is a kind of light module.
by function: Including optical receiving module, optical transmission module, optical transceiver module and optical forwarding module.
According to the parameters of the points, there have hot - pluggable and non - hot - pluggable.
As per Packaging: SFP, GBIC, XFP, Xenpak, X2, 1X9, SFF and so on .
Transmission rate: 100 MB, 1000 MB, 2.5g, 4.25g, 4.9g,6G,8G,10G and 40G, 100G, 200G.
According to encapsulate points:
1. XFP (10 Gigabit Small Form Factor Pluggable) is a heat-exchangeable optical transceiver independent of the communication protocol, used for Ethernet of 10G BPS, SONET/SDH and fiber channel.
2. Small pluggable and removable luminescent module (SFP), currently the most widely used.
3. Gigac BiDi series single fiber bidirectional optical module USES WDM technology to realize bidirectional information number (point-to-point transmission) of a single optical fiber. In particular, the lack of fiber resources, the need for a fiber bidirectional signal). Gigac BiDi includes SFP BiDi, GBIC BiDi, SFP+ BiDi, XFP BiDi, SFF BiDi, etc.
4. RJ45 port small pluggable module, also known as electrical module or port module.
5. According to its pins, SFF is further divided into 2x5, 2x10, etc
6. Gigabit Ethernet interface converter (GBIC) module
7. PON(a-pon, g-pon, ge-pon) optical module for passive optical network
8. 40Gbs high-speed light module.
9. SDH transmission module (OC3,OC12,OC48)
10. Storage module, such as 4G,8G, etc
SFP light module:
Optional: wavelength of 850 nm, 850 nm, 1490 nm, 1550 nm, CWDM, DWDM
DDM: Support .
Our Service :
1. Professional manufacturer, 100% tested.
2. Customers solutions in days, not weeks.
3. Warmly services with careful attentions.
4. Can provide your specific inquiry within 24 hours.
5. Save much costs, bring more benefit for customer to expand business.