FC to SC Fiber Optic Patch Cord
These high speed multimode 50/125um duplex fiber optic patch cables are terminated with LC fiber optic connectors on both ends (LC-LC). Called Lucent Connectors, Little Connectors or Local Connectors, these snap-in connectors are typically used for high density connections and are compatible with plug-and-play devices such as SFP modules and XFP transceivers.
Application
CATV
Active device termination
Telecommunication networks
Metro
Local Area Networks (LANs)
Data processing networks
Test equipment
Precise installations
Wide Area Networks (WANs)
Features
LC-LC connectors;
For pigtails, one side of LC only;
Simplex or Duplex version on request;
UPC or APC polish available;
Any other connector type at another side upon request;
Fan-out on request;
Superior quality standard PC/UPC/APC polishing;
100% factory test (Insertion Loss & Return Loss);
0.9mm, 2.0mm and 3.0mm cable optional.
Optical Characteristics
Fiber Type | Max. Attenuation(dB/km) | Min.Overfill Launch Bandwidth (Mhz.km | Min.Gigabit Ethernet Link Distance (m) | ||||||
Gigabit | 10Gigabit | ||||||||
850nm | 1300nm | 1310nm | 1550nm | 850nm | 1300nm | 850nm | 1300nm | 850nnm | |
OM1 62.5/125µm | ≤2.7 | ≤0.6 | - | - | ≥500 | ≥600 | 275 | 550 | - |
OM2 50/125µm | ≤2.3 | ≤0.6 | - | - | ≥500 | ≥500 | 750 | 600 | 150 |
OM3 50/125µm | ≤2.3 | ≤0.6 | - | - | ≥1500 | ≥500 | 1000 | 600 | 300 |
OM4 50/125µm | ≤2.3 | ≤0.6 | - | - | ≥3500 | ≥500 | 1100 | 600 | 550 |
G652D 9/125µm | - | - | ≤0.30 | ≤0.18 | - | - | - | - | - |
G657A 9/125µm | - | - | ≤0.35 | ≤0.21 | - | - | - | - | - |
Optical Performance Data
Item | Single mode | Multimode | |||||
PC | UPC | APC | 62.5/125 | 50/125 | 50/125 10G | ||
Insert Loss/connector (single Fiber) | 0.2dB Max. (0.15dB typ.) | 0.3dB Max. (0.25dB typ.) | |||||
Return Loss | ≥45 dB | ≥50 dB | ≥60 dB | N.A | |||
Insert Loss/MTRJ Connector | 0.5dB Max. (0.45dB typ.) | 0.5dB Max. (0.45dB typ.) | |||||
Pull Strength | ≥98N | ≥98N |
High precision ceramic core with small concentricity error and inner hole diameter provides additional insertion loss and return loss to avoid degradation of transmission performance and damage of optical transceiver devices.
The advanced grinding technology and equipment are adopted to ensure that the technical parameters, such as the center grinding deviation of the optical fiber, the concave of the optical fiber and the curvature radius of the ceramic end face, all meet the specified standards.
In order to ensure the long-term use of the connector, the company not only conducts attenuation and back reflection tests on the connector, but also USES precision interferometer to test the scratches or defects on the surface of the connector, and measures the curvature half-warp, grinding deviation, fiber sag and protrusion of FC, ST, SC, LC and MU type connector, so as to ensure the quality of the connector.
100% optical full detection, each jumper is guaranteed to have good grinding quality and excellent performance indicators.
FAQ
1. Are you the real factory?
Yes, we are the real factory with 15 years’ history.
2. What is your fiber brand?
Fiber brands including : Soptic
3. What is your main products?
Indoor armored patch cords fiber cable; Optical patch cords SC/LC/FC/ST; MTP/MPO optical patch cord. including OM1, OM2, OM3, OM4 ;
4. Do you offer guarantee for the products ?
Yes, We offer 1-2 years warranty to our formal products .