Main advantages of MPO/ mtp-lc branch jumper:
1. MPO/MTP branch jumper provides a neat, high-density way to implement high-density switch port replication, reducing the risk of port corruption or errors on the switch.
2. Branch jumper occupies less space in the cabinet and has better vertical management than traditional jumper. For example, the branch at one end of the 12-core branch jumper is much smaller than that of the jumper with equal number of cores.
3. Reduce the inconvenience caused by cable congestion for LAN and storage network center management; Increased cooling air flow makes it easier to move/add/change cables or equipment.
4. Branch jumper provides staggered LC branches that can be used including engineering customization to match the network ports of electronic devices to provide seamless integration between wiring infrastructure and electronic devices.
What is the typical application of mtp-lc branch jumper?
Mtp-lc branch jumpers are used for port replication of blade switch board CARDS to facilitate the connection of these ports to other devices. There are two types of branch jumpers, module branch jumpers and trunk branch jumpers, based on specific applications and which components are inserted.
The module branch jumper is directly connected to the rear of the mtp-lc module and copies the switch port to a distribution rack located in the same or adjacent racks. Normally when this application is used, the switch is located in an MDA or column header exchange
Fan-out Side Technical Specifications
Single Mode PC
Single Mode APC
< 0.2 dB
< 0.3 dB
> 50 dB
> 60 dB
Color coded connector housings are available to differentiate fiber type as follows:
Green for SM
Yellow for SM Super Low loss
Beige for MM
Aqua for OM3 Fiber
Heather-Violet for OM4 Fiber
Capacity are available in 4, 8, 12 and 24.
Ferrules are available for SM Standard, SM Super Low Loss, MM Standard and MM Low Loss.
Boots are available for Ribbon Cable, Ribbon Fiber and Round boot.
1) Lead time : With more than 100 employees in my company, at least 10,000 connectors can be produced.
2)Research Department: With our separate research team, so we are able to have products made according to your requirements.
3)Quality assurance: Every product will be tested to be of good quality. Meanwhile free samples can be supplied for your test. The guarantee period is 10 years.So if there are problems with the goods, replacement will be available.