1270-1610nm Optical Fiber Transceiver Module 1.25g 80km CWDM SFP

1270-1610nm Optical Fiber Transceiver Module 1.25g 80km CWDM SFP

SOPTIC SFP-1.25G-CWDM-1550 transceivers support the 2-wire serial communication protocol as defined in the SFP MSA.
Chat Now

Product Details

Our eternal pursuits are the attitude of 'regard the market, regard the custom, regard the science' as well as the theory of 'quality the basic, have confidence in the very first and management the advanced' for Optic Module, SC Connector Patch Cord, SC SM Duplex Optical Fiber Jumper. We firmly believe that 'continuously maintaining customer satisfaction' is the key to enterprise development. With excellent business philosophy and perfect after-sales service, we will continue to make sincere contributions to our customers. Our products have been exported to all over the world.

1.25Gb/s CWDM SFP Transceiver

SOPTIC’s SFP-1.25G-CWDM-1550 Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The SFP transceivers are high performance, cost effective modules supporting dual data-rate of 1.25Gbps/1.063Gbps and 40km transmission distance with SMF. They are RoHS compliant and lead-free.

Product Features

Up to 1.25Gb/s data links

Duplex LC connector

Hot-pluggable SFP footprint

Uncooled DFB laser transmitter in 18 possible CWDM wavelengths

RoHS compliant and Lead Free

Up to 80Km on 9/125um SMF

Metal enclosure for lower EMI

Single +3.3V power supply

Low power dissipation <800mW (0~70℃),<1000mW (-40~85℃)

Commercial and industrial operating temperature optional

SFP MSA SFF-8074i Compliant

Applications

Gigabit Ethernet

1x Fibre Channel

Switch to Switch Interface

Switched Backplane Applications

Router/Server Interface

Other Optical Links

Product Selection

Wavelength

XX

Clasp Color Code

Wavelength

XX

Clasp Color Code

1270nm

27

Gray

1450nm

45

Brown

1290nm

29

Gray

1470nm

47

Gray

1310nm

31

Gray

1490nm

49

Purple

1330nm

33

Purple

1510nm

51

Blue

1350nm

35

Blue

1530nm

53

Green

1370nm

37

Green

1550nm

55

Yellow

1390nm

39

Yellow

1570nm

57

Orange

1410nm

41

Orange

1590nm

59

Red

1430nm

43

Red

1610nm

61

Brown

Notes:

1. Connected directly to TX data input pins. AC coupled thereafter.

2. Or open circuit.

3. Into 100 ohms differential termination.

4. 20 – 80 % Measured with Module Compliance Test Board and OMA test pattern.

5. Loss Of Signal is LVTTL. Logic 0 indicates normal operation; logic 1 indicates no signal detected.

6. Receiver sensitivity is compliant with power supply sinusoidal modulation of 20 Hz to

1.5 MHz Up to specified value applied through the recommended power supply filtering

Network .

Digital Diagnostic Functions

SOPTIC SFP-1.25G-CWDM-1550 transceivers support the 2-wire serial communication protocol as defined in the SFP MSA. It is very closely related to the E2PROM defined in the GBIC standard, with the same electrical specifications.The standard SFP serial ID provides access to identification information that describes the transceiver’s capabilities, standard interfaces, manufacturer, and other information. Additionally, SOPTIC CWDM SFP transceivers provide a unique enhanced digital diagnostic monitoring interface, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage .It also defines a sophisticated system of alarm and warning flags, which alerts end-users when particular operating parameters are outside of a factory set normal range.The SFP MSA defines a 256-byte memory map in E2PROM that is accessible over a 2-wire serial interface at the 8 bit address 1010000X (A0h). The digital diagnostic monitoring interface makes use of the 8 bit address 1010001X (A2h), so the originally defined serial ID memory map remains unchanged. The interface is identical to, and is thus fully backward compatible with both the GBIC Specification and the SFP Multi Source Agreement.The operating and diagnostics information is monitored and reported by a Digital Diagnostics Transceiver Controller (DDTC) inside the transceiver, which is accessed through a 2-wire serial interface. When the serial protocol is activated, the serial clock signal (SCL, Mod Def 1) is generated by the host. The positive edge clocks data into the SFP transceiver into those segments of the E2PROM that are not write-protected. The negative edge clocks data from the SFP transceiver. The serial data signal (SDA, Mod Def 2) is bi-directional for serial data transfer. The host uses SDA in conjunction with SCL to mark the start and end of serial protocol activation. The memories are organized as a series of 8-bit data words that can be addressed individually or sequentially. Digital diagnostics for the SFP-1.25G-CWDM-1550 are internally calibrated by default.

For More Information

SOPTIC Technology

Tel: +86-186 8156 5857

Skype /Email: sales@sopticom.com

Web: www.sopticom.com

With the help of various marketing activities and broadcasting channels, the sales volume of our high-tech and high-quality 1270-1610nm Optical Fiber Transceiver Module 1.25g 80km CWDM SFP has increased significantly. We also warmly welcome customers to visit our factory and purchase our products. Our company has been committed to the national energy conservation and environmental protection cause for many years.
Hot Tags: CWDM SFP optical transceiver module, China, manufacturers, factory, discount, low price, ABS 1X2 PLC Splitter, SC Fiber Optical Pigtails With 3meter, LC Fiber Pigtails, 10GbE SFP+ Optical Transceiver Modules, SFP SM Optical Fiber, FC SM Simplex Optic Jumper

Inquiry

You Might Also Like