SC Fiber Optic Pigtail
SOPTIC Optic Pigtail is important of optical network.they have same or different connectors which are installed on the end of fiber optic cable. The Fiber Optic Pigtail series comes with a comprehensive collection of lengths and connectors to fulfill your demand for the deployment.
(1) Ceramic Ferrule;
(2) High return loss;
(3) Low insertion loss;
(4) Good repeatability and and exchangeability;
(5) Excellent Polished and 100% tested;
(6) Complying with Telcordia ,GR-326-Core, IEC and RoHS Standard.
Local Area Network (LAN)
Data communication network
Telecommunication optical transmission network
Optical access network(OAN)
Active device termination
Fiber optics data transmission(FODT)
Fiber Cable Type
Fiber Diameter (um)
Cable OD (mm)
Typical Insertion Loss (dB)
Return Loss (dB)
Insert-pull Test (dB)
Anti-tensile Force (N)
Temperature Range (℃)
1. How is the optical fiber attenuation coefficient defined?
College answer: with steady state in a uniform fiber attenuation (dB/km) per unit length is defined.
2. Insertion loss what is?
College a: refers to insert the optical components in optical transmission lines (such as inserting connector or coupler) caused by decay.
3. The bandwidth of the fiber is related to what?
College answer: the bandwidth of the fiber refers to: in the transfer function of the fiber, the optical power of amplitude 50% lower than zero frequency amplitude modulation frequency or 3 db. The bandwidth of a fiber is approximately inversely proportional to its length, and the product of the bandwidth length is a constant. There are several kinds of college
4. The dispersion of the fiber?Related to what?
College: the dispersion of the fiber is to point to in a single fiber group delay spread, including mode dispersion, the structure of the material dispersion and dispersion. Depends on the characteristics of both the light source and the fiber.
The SOPTIC of Fiber pigtails adopts advanced grinding technology and equipment to ensure that the fiber core has no deviation, no scratches, the fiber has no dents, the radius of end surface curvature is the same, insertion loss and return loss are relatively low, the tight buffer layer can protect the fiber from damage and facilitate welding. For more details on fiber pigtails , pls contact ours .